GearHeadz Automotive is here fokes

[gearhead]

Let me start off with saying thanks for letting me be a sponsor and we shall see how it goes. Its should work rather well, i am doing this on several other web sites with great success. (Columbus Racing, Ohio Custom's, Ohio honda's and so on). And the about the only thing i dont do is body work. I have tons of Mustang, Lsx, and just about anything automotive repair wise is not a problem around here.
My Labor rate is normally $65 a hour. but for forum members, there family and friends its $45 a hour. I also have the hook up with 2 other dynos here in town.One is a Inertia loading dyno, that does AWD up to a extended wheel base's. both with ford/ gm tuning abilities.

i'll be updating this top post as i go i figured i would just throw this up for the time being. rather busy around the shop here today.


lets get to the specails!

Well its getting hot out!

I'm going to be offering A/C service's thru My family business (its a different location then my shop). We just stocked 30,30 lb jugs. So stock is Not limited. We also offer R12 charging.
Runs $85+taxs up to 3 pounds of freon(R134a). anything above that is just $10 , and it dont matter if it's 10 pounds extra.Capable of doing 4 cars or more at once.Retro fitting is not a issue, and is priced slightly higher. And any type of repair is not a issue.All full service charge's come with a Vacuum test, new oil and die.And pressure checking and so on.
pm or email for more details or go to the website http://handsautomotive.com/


Gear installs $225.

Engine and Trans installs starting @ $200

F body/Fox body cam/spring installs starting @$300!
customer to provide coolant,crank bolt(lsx), cam and springs and gaskets(as needed)
and oil filter(as needed), and any other parts that may be needed!

Long tube headers/Off road y pipe installs starting at $125.
add a cat back or cutout install for $50


Gearheadz is combining with Boost Performance Autosports to bring you Low price installs and parts pricing! For info on parts and pricing please email Alex directly Alex@boostperformanceautosports.com or PM him here I have Alex hooked up with many vendors, including my exhaust tubing kits that i have been using.


TRANSMISSION REBUILDS
auto and manuals, stock or performance rebuilds, with warrantys.
pm with details for pricing.
year make model and the issue your having, and let me know if its in the car or not, so i get you the correct pricing.
T56 bench builds, start at $350 plus parts
Complete rebuilds(with removal) starting @950
bench builds Run 300-350 plus parts, most auto trans are modded for less failure and so on. pm me for details on it.

Honda trans diff install is $250 , please provide the hardened botls and what not needed for the install

and we can also service your gear replacement aswell @350

now these pricing is for bench building your trans(ie you carry it in)



New number
614-367-1799 leave message if no answer. thanks


Best pads Ever AKebono! these are the guys that make the oem pads. hell right now they are working on the 2011 Cadillac brake system!
http://www.akebonobrakes.com/afterma...uro/index.html (http://www.akebonobrakes.com/aftermarket/euro/index.html)
i have full stock of the Pro-ACT, and can have most of them here with in a hour.
the higher end ones are the euro's and street performance ones i can have here in a day or so.
and i can get just about any type of brake pad you want. most dust free pads are just the ceramic ones, which i have several sources for. and all my pad's carry a lifetime warranty!

pricing is something you would have to call the shop for during the afternoon,between 11-4.

The weather is starting to get warm, and that means SUMMER FUN!

Weddings, Graduations, Birthdays, Family Reunions, Retirements, Company Picnics and Father's Day...

We have set up a GIFT CERTIFICATE program to help you with the ever taxing dilemma, "What should I get them?" If you have a loved one that doesn't really like the DIY automotive world, or doesn't have the time, how about Pre-Paid Automotive Care? We are now offering any denomination Gift Certificates or if you would rather list a specific service or customization, we can accomodate, as long as we have info on the YMM to get an accurate quote.

We can also take care of Surprise Resto/Custom Upgrades for that special gearhead in your life, like Overhaulin'. We can take care of Diagnostic, Performance/Power Mods, Custom Fab, Repair and Preventative Maintenance tasks in-house, and have established a good network of quality affiliate shops to get involved* and cover all bases.

We have been quite busy lately building a strong roster of quality vendors to get our customers the best deal possible for the products we have come to appreciate. Pace Setter, Cometic, American Racing, DynoMax, Moroso and Wynn's, to name a few. If there is a product you think is great and would recommend, send us a PM, and we will check it out.


In closing, I want to thank everyone that has made our first 2 weeks in the shop quite amazing and we are very grateful. I am working on creating a referral program for our customers that help promote and spread the Gospel According to Gearhead. It will be funny, and rewarding. Stay Tuned! We are now up and running on Myspace (www.myspace.com/gearheadzautomotive (http://www.myspace.com/gearheadzautomotive)), FaceBook (Gear Headz) and we have a few ads in circulars around the Columbus Metro. We are mid-process on the website (www.gearheadzautomotive.com (http://www.gearheadzautomotive.com/)) and Merch (stickers, tees & hoodies)


http://i5.photobucket.com/albums/y196/gearhead559/Gearheaddude21.gif

[Junior2561]

welcome

[nuckinfutz4notch]

Welcom on..u across from Mt. Carmel Hosp back in there?

[gearhead]

yes i am...right bye morrison and westbourne...

[96Mystic]

Do you weld also? Good to know when I get ready for the sub frame connectors.

[SCHMUCKINGHAM]

Do you weld also? Good to know when I get ready for the sub frame connectors.



I wont speak for Rob but I hear he can weld pretty well.



Rob, I <3 U

[jomull55]

I wont speak for Rob but I hear he can weld pretty well.



Rob, I <3 U

I've seen some pictures of his welds over on Ohio Customs and it looks good.

[gearhead]

Do you weld also? Good to know when I get ready for the sub frame connectors.
yes i have done lots of them....:thumb_beer_cheers:

I wont speak for Rob but I hear he can weld pretty well.



Rob, I <3 U

thanks ass hole:tongueout:

[bond99]

+1 for Gearheadz! Rob does great work.

[appn88]

very inteligent man

[gearhead]

thanks guys

[SCHMUCKINGHAM]

thanks ass hole:tongueout:


I LIKE BEING AN ASSHOLE:spank2:

[92BlackCoupe]

I can't believe how close you are to me Rob. Glad to see you got a shop going. I may be looking you up sometime if I come across something in my build I can't handle.

Todd

[gearhead]

top post updated with specials....

[nicks01gt]

do you have an hourly rate?

[gearhead]

do you have an hourly rate?
yes like in the top post, its $45 per hour.

[gearhead]

Well since the windsheild banners went so fast last time, i ordered a ton more! and added a new size....

banners $10. smaller ones $3.
http://i5.photobucket.com/albums/y196/gearhead559/100_3069.jpg
http://i5.photobucket.com/albums/y196/gearhead559/100_3070.jpg

free any amount of major work getting done.
heres a pic for everyone
http://i5.photobucket.com/albums/y196/gearhead559/100_3071.jpg
in many colors now!

white, black, blue, metallic silver,

red and orange are coming soon aswell..

GET YOURS WHILE YOU CAN!

[RazorX]

+2 on Rob doing great work.

Welcome as a sponsor Rob.

[Melon]

how much dose awd tuning go for? and awd pulls with out tuning? as my buddy is bulid a stroker large turbo talon, also do you do any aem stand alone tuneing as that is what he has

[gearhead]

how much dose awd tuning go for? and awd pulls with out tuning? as my buddy is bulid a stroker large turbo talon, also do you do any aem stand alone tuneing as that is what he has

i'll talk with him and get you some pricing. i normally only offer these service's for customers wanting before and after, pulls and tuning of course.
just for ****s here is a graph from last week, with a customers car.
http://i5.photobucket.com/albums/y196/gearhead559/Shop%20stuff/gearheadzdyno60maro.jpg

pending on car..yes i can get it done. this was rented dyno time( with wideband) , customer had his own tuning software.awd load bearing dyno (only 2 in ohio, that i know of). fox body chipping, and sct software for any of the newer fords (about the best thing out there really IMO, exp for drive by wire stuff) and hp tuners for gm's.
afm1000 wideband with it directly into the exhaust stream(only base runs done on a sniffer setup) adding a bung is extra($40)

i like the load bearing, cause you can get most of your drive-ability figured out before you make a full pull and then during the pull the car is seeing very similar load as it would on the street. I dont do just basepulls unless I am doing work that will require tuning later and I need it.


i'll get more info on this and post it up later. this kind of stuff gets done with closed doors, cause its not on site. i'll get with my dyno guy and see what he says...normally dyno time runs per hour, or flat fee's for tuning etc.

[gearhead]

bump..

[AllBlack02]

I need my lowering springs and isolators put on, what would that cost me? :noidea:

[gearhead]

pm sent

[gearhead]

bumpers....

[Mustang02]

bumpers....No need to bump. This thread is a sticky. :thumb_beer_cheers:

[gearhead]

yeah i seen that after the fact..lol

[Franchi]

Dangit. I just had 4:10's put on and cost me $360. I'll def keep you in mind for future work!

[gearhead]

no biggie man. just lmk what you need.

[Bogie89]

Are you guys able to put 4.6s in classics? i have always wanted to get this priced out and seems like you are the people to ask!

[gearhead]

im sure i can do it....hell i have a 40 ford coming down for a complete one off build here this winter...he just needs to make up his mind on what he wants...

but the only swpa into a older chassis i have seen like that was a 03-04 terminator drive line swapped into one, but they had to go mustang 2 front end cause of oil pan clearance and the strut towers just wouldnt let it fit

yeah i think im right on the money
http://allfordmustangs.com/forums/4-6l-tech/59228-1965-mustang-4-6l-32v-engine-swap.html#post931392

http://www.hotrod.com/featuredvehicles/hrdp_0604_1969_ford_mustang_overhaulin_blackened/year_one.html


I have a 1965 and i am doin the samething that you would like to do. I had accquired my brothers 1965 mustang and i also got a 4.6l dohc motor from a lincoln aviator (same as the mach one, wish it was a cobra). Anyways you need to widen the engine compartment by taking out the shock towers and now to do this you need to change the front suspension (http://www.allfordmustangs.com/forums/#), The company i Recomend is www.RRS-online.com (http://www.rrs-online.com/) They have front strut/coil over suspension, brembo brakes, koni shocks, eibauch springs. If you wantto get crazy that is other whise they have a regular disc brake set up and shock. But you need a smaller front suspension as such i do belive fat man fabrications also do have something too. But RRS has a notching kit for the engine compartment, too cut back the shock towers to give you the extra room. Also you will need a steering rack and there are many different types out there but the ones i recommend yet again is the RRS they do have a nice manual/power steering rack and can adapt to any pump you have. Also for engine mount adapters there is a place called DVS Resterations they are in utah i belive if i remember correctly and they have the engine mount adapters for the swop. adapt from the original mount for the 289 to the mounts on a 4.6l. also you need to change the oil pan from a rear sump to a front sump for the steering rack set up. And you can get that from DVS restorations. Also if you want to get crazy as i am you can get a 99-2004 mustang cobra independant rear end susupension/rear end and adapt it to your 65 via items available at dvs resterations. and umm oh yeah if you would like to reprogram your ecm/pcm for the new 4.6 so you dont have to have rear ho2s(cat), evaperative system, and all that other crap. A good place to go to i have yet to experience this but i have talked to them i am just needing the $$ to continue my venturing project but Thedetailzone.com are out of east coast (deleware i belive) and they can make an engine wiring harness for your motor and reprogramm your pcm so you dont have to worry about chipped keys/security emission systems. well anyways if you have any more questions lemme know i am more than willing to help out a fellow mustanger! Also you can get wiring harnesses and pcms out of junk yard cars as i did, just call your local ford dealer with your engine code and they can giveyou the info of what pcm goes with that motor. Shoot now that i think of it i remember you may need a tunnel kit for your transmission if you change it or i htink you may need it for the c4 there is a place in claifornia and the name is ummm lemme think.... and umm its called autowerks, i do have phone numbers to all of these places. if you cant find them.

[buckeyen2000]

Welcome guys. I think you did some work on a buddies of mines car...a burnt orange RSX...turbo and all ..he loves it , so that is +1 on recommendations that I throw in

[gearhead]

ah yes josh's car..love that thing..need some more work done to it to make it 100%, but we are fixing things as they break..lol

[AllBlack02]

edit: plans changed

:skid:

[gearhead]

edit: plans changed

:skid:
you'll have that...better off with the super charger anyway..

[red07Pony]

I was just down in Myrtle Beach for Mustang Week and talked to an owner from Cols who had your logo/ad on his window. So I'm passing along a "does good work" from him. Word of mouth is some of the best advertising around.

[gearhead]

I was just down in Myrtle Beach for Mustang Week and talked to an owner from Cols who had your logo/ad on his window. So I'm passing along a "does good work" from him. Word of mouth is some of the best advertising around.
why thank you..

which car was it? i had a few customers down there this year..wish i could have made it myself

[Whitestang5oh]

you guys have 110-116 octane sitting around? I need it from time to time depending on which tune I'm running :)

[gearhead]

no i dont..i have been looking into a torco deal..but trying to get the trick flow and moser stuff going first.

[red07Pony]

why thank you..

which car was it? i had a few customers down there this year..wish i could have made it myself
I wish I could remember...sorry....I saw WAY too many stangs to remember. Not that there's anything wrong with seeing too many stangs :)

Also I just passed along your info to another local stanger I know from another forum who wants some gear work done on his 2005+ stang. He just got an outrageous quote from "somewhere else".

[stanger]

Is the $225 gear install still good? Have 4.10's for the front Dana 30 on my Jeep TJ needing to go in, have gears and install kit.

[gearhead]

Is the $225 gear install still good? Have 4.10's for the front Dana 30 on my Jeep TJ needing to go in, have gears and install kit.
yes...

[gearhead]

making crazy deals as always...lmk what you guys need

[Whitestang5oh]

...you guys get good deals on injectors by chance?

[gearhead]

what you need?

[Whitestang5oh]

what you need?


75lb or 95lb low imp

[gearhead]

75lb or 95lb low imp
cant help much there sorry :(

[03stage2]

Do you guys rebuild bottom ends? Do turbos maybe?

[gearhead]

Do you guys rebuild bottom ends? Do turbos maybe?
im rebuilding several motors at the moment honestly.

and i do turbo installs, and tuning etc.

or was you needing a turbo rebuilt?

[93lx331]

If I brought you my fox i just bought, could you look over it, maybe drive it, just to give me an idea what i need to fix or replace before I start getting nuts with it?

[gearhead]

If I brought you my fox i just bought, could you look over it, maybe drive it, just to give me an idea what i need to fix or replace before I start getting nuts with it?
pretty sure i can..

i also offer a 127 point safety/used car inspection as well.

and im pretty sure i can help you go nuts with it too..i mean there are only 8 different stangs sitting here at about any givin time

[93lx331]

Awesome! I'll call you soon and maybe we can set something up.

[gearhead]

http://i5.photobucket.com/albums/y196/gearhead559/Shop%20stuff/WinterGHFlyer.jpg
and a lof for $19.99
(normal 127 point inspection is $39.99, and coolant flush's normally start at $49.99)

also working on 4x4 winter prep packages with diff services, chassis lube and so on.

Also would like to add, we now have a trans flush machine in the house.
working on trying to package that, but most cars take different fluids, so with that being said, you may bring your own fluids , i only charge $35.00 plus fluids for a trans flush.

Cometic gaskets in the house as well. pm or call for pricing.

Amsoil in the house now too. call or pm with your needs.

[leonide]

i am so glad i went to this place, now i have a place to do installs and stuff! :)

[Ron M]

I had gearheadz do my O/R H pipe on my 2005 stang. And they did a fantastic job and was very professional. I will be going back to them from here on out. When you find a good mechanic it's best to keep them.

[leonide]

i have an O/R X i need installed, gonna go to these guys when i get the time and $ for install.


how much is a midpipe install BTW?

[Ron M]

i have an O/R X i need installed, gonna go to these guys when i get the time and $ for install.


how much is a midpipe install BTW?



I think they did mine for $97.00 and they did within an hour.. Why did you go X pipe unstead H pipe? just wondering why

[gearhead]

I think they did mine for $97.00 and they did within an hour.. Why did you go X pipe unstead H pipe? just wondering why


h pipe seem to give more in the mid range of the curve, where x pipe's bring in more up top...from every thing that i have seen any way

[Ron M]

yeah I just wonder why people choose them. I just like the sound of the H pipe. Even with those flowmasters on and not those SLP LM's lol... Those were way to loud....

[gearhead]

december specials!


gear installs......$200 plus taxs,mss(and parts if needed)

RWD trans/clutch swap 225 plus taxs,mss(and parts if needed, and flywheel turning if needed)

more to come!!!!!!!!!!!!!!!!!111111

[AllBlack02]

doin a sale on gears the month before I need them huh..

[gearhead]

doin a sale on gears the month before I need them huh..
and the clutch...and if your nice, ill let you have them for that in jan

[AllBlack02]

and the clutch...and if your nice, ill let you have them for that in jan

:deal:

[leonide]

i sent you guys an Email about my transmission troubles. i hope you got it. :)

[gearhead]

yes i got it..i'll have to check with my trans guy on monday...sounds like you broke the pins in the rails.., and or maybe the forks too..hard to say what all is fubared till you get it out and tear it down

[Night Mare]

You're a bad influence on me Rob. Every time I read one of your threads, you make me want to head down to your shop and spend copious amounts of money on go-fast goodies!!!!!

I do hope to some day have you help me put together a really nasty turbo set-up though.

[gearhead]

You're a bad influence on me Rob. Every time I read one of your threads, you make me want to head down to your shop and spend copious amounts of money on go-fast goodies!!!!!

I do hope to some day have you help me put together a really nasty turbo set-up though.
:thumb_beer_cheers:

lmk when your ready....just dont be one of those guys that cant make up his mind on what he wants done, or what he is really aiming for..thats just a :beathorse: ;)

[Night Mare]

I'm not the fickle type. I know what I want. It's just a matter of having the money to get it. :(

[gearhead]

banks...they give these things out called loans...




or just rob one...

[Night Mare]

Thanks for the advice.

[gearhead]

just saying...lol

[Night Mare]

There you go tempting me again. ;)

[88lxvert]

hey you poking at me with that cant make up his mind stuff i had my mind made up you just keep making me second guess myself

[gearhead]

hey you poking at me with that cant make up his mind stuff i had my mind made up you just keep making me second guess myself
hey, every one goes thru it on a project like yours.. im just trying to keep you from making the wrong choices..can you under stand that? i mean its only money, id just hate to see you spend it twice..granted you could recop some money from selling the lesser parts, but the more expesive stuff dont look so good, if you already spend so much on the cheaper stuff. and i would rather do something once instead of twice! or you buy a bunch of stuff, and find out you didnt really like it or need it, and then you wasted money, that could have been spent better. now that i know its more of a driver, then any track, its harder for me to help you make up your mind...i mean, you can still carve corners with the other stuff, im just trying to think of it from a durability stand point aswell. coming down to the intended use of the car...hell you could go to the drag strip, and get hooked on doing it..then the upr stuff would be right at home

[88lxvert]

i here ya i was just messin wit ya anyways... i am sure i would love to take it to track i just think i would never have time to... but your right i dont want to do **** twice i have to figure out where to trim to make it work i want it to handle well but i also need alot of little **** so it may take longer if we go all out with my cash flow thats all i am trying to not go get the loan for now and see if i can doit it on savings and extra cash but if all else fails i know where the bank is.... ha ha

[GOBLIN]

Good talking with ya today Rob, and thanks for the info on the 5lug swap. Will be seeing ya down the road for the swap.

[gearhead]

hey, can you move this to my forum while your here..lol

[GOBLIN]

Rob, do you know what springs come with that MM starter kit?

[gearhead]

MM Road & Track Springs

[Cool Bam]

Could use a quote on a 2003 mustang gt.


Installing....

Eibach pro springs
HID lights


Won't be doing for some time as more towards May-early June.

[gearhead]

not to be a ass, but my quotes are only good for 15-30 days.

when you are closer to being ready for the install, call the shop, and speak with dana. she can get you a quote.

but spring install's run around 250 plus taxs and mss. and the hid install will mainly depend on the style of the kit. (ie weather or not i have to run extra wiring and so on)

[Cool Bam]

Alright thanks I will do that around May 15.

[White99GT]

Do you guys do gear installs? Price on putting in some 4.10's, Nitrous kit and Controller and tune!

[gearhead]

yes..gear installs run $200.

the other stuff will depend on what tuning device you have, and what controller you need wired in

[White99GT]

you got a PM

[AllBlack02]

Do you guys do gear installs? Price on putting in some 4.10's, Nitrous kit and Controller and tune!

Rob did a great job on my gears and his price was awesome!