2step on a 98gt

[98GrdPoundr]

hey Don is there a way to set up a launch rev limiter on a 98gt, i already have a sct flip chip in the car.
btw you might recognize the car, Rob rebuilt the trans and installed a spec stage 3 clutch over the winter, its worked flawlessly so far this year.

[Don@LRT]

Nope, you can only do that for 99-04 vehicles. Missed it by one year. Sorry!
Don

[rob@LRT]

Hey Steve! Glad to hear the trans is working well!

[98GrdPoundr]

Nope, you can only do that for 99-04 vehicles. Missed it by one year. Sorry!
Don
ok thats what i thought, so you have any ideas on how to go around it, its killing me at the track trying to keep the rpms right and trying to watch the tree at the same time.

[98GrdPoundr]

Hey Steve! Glad to hear the trans is working
well!
hey Rob do you think theres anything to adjusting the pinion angle i see that some people do it to help there 60ft times. just curious if you think it works

[rob@LRT]

hey Rob do you think theres anything to adjusting the pinion angle i see that some people do it to help there 60ft times. just curious if you think it works

It can make a difference, I always get them around -2* depending on the setup, the goal is to have close to a 0* angle under load. A huge difference - probably not unless it's WAY off.

[98GrdPoundr]

cool, its hooking pretty well as it is 1.61-1.66 all weekend up at fun ford

[rob@LRT]

cool, its hooking pretty well as it is 1.61-1.66 all weekend up at fun ford

Thats very good for the power the car makes.