E Green SVT - Winter mods

[E Green SVT]

Ok, so I'm starting to finish up the winter mods this year which basically consist of new wheels and tires (17x9 03 Cobra wheels with 275/40/17 Hoosiers) and a ported stock intake along with a ported throttle body. Possibly some beefier halfshafts later in the year as well.

Here are some pics:

We started off by taking off my intake to send it off for some porting.


Here is what we started with.

http://i33.photobucket.com/albums/d65/mikec917/DSC01496.jpg

Then we started to take off the intake.

http://i33.photobucket.com/albums/d65/mikec917/DSC01499.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC01501.jpg

Look at all that oil!! :scared:

http://i33.photobucket.com/albums/d65/mikec917/DSC01503.jpg


http://i33.photobucket.com/albums/d65/mikec917/DSC01506.jpg

Ok, after we got the intake off, it was sent off to be ported.

Here is what it looks like after we got it back from porting.

http://i33.photobucket.com/albums/d65/mikec917/DSC03572.jpg

And Damn did they do some NICE porting! :skid:

[99Slobra]

Damn. I need to get mine ported...

[gtstangfreak]

Put together an oil seperator for your PCV circuit and it will help with most of the oil.

[Junior2561]

:disturbed: thats a heck of a port job!!!! Drew should have sent his there too....

[mogs01gt]

nice but why did you take your crank pulley off to remove the intake?

[SeaHorse]

nice but why did you take your crank pulley off to remove the intake?



hmmmm

[Junior2561]

THAT BE AN 03 COBRA SUPERCHARGER FOoooooooooooooooooooooooOZ!!!!

[DsmFighter]

THAT BE AN 03 COBRA SUPERCHARGER FOoooooooooooooooooooooooOZ!!!!


Who called this one? Anyone? Anyone? :wave:


Congrats Mikey. I'm assuming your swapping everything over from an 03 then? Still keeping the 4.56's?

[Sable]

Damn Mikey, congrats. You suck. :tongueout:

[SeaHorse]

So........ 12.60's then?

[1SLOW46]

with daddy driving it:rofl::rofl::rofl::rofl:

[E Green SVT]

Who called this one? Anyone? Anyone? :wave:


Congrats Mikey. I'm assuming your swapping everything over from an 03 then? Still keeping the 4.56's?

Probably for a little while... I'll see how crazy it is and decide how long to keep them... :)

[SableGTO]

Awesome dude!

You'll be smoking me into the 11's now!
Light them up!

[E Green SVT]

nice but why did you take your crank pulley off to remove the intake?

:rofl:

[GTkyle]

Hehehehehe


Mikey did the guy ship the rest of your **** out yet? I wanna see this thing run!!!

[E Green SVT]

http://i33.photobucket.com/albums/d65/mikec917/DSC01507.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC03573.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC03571.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC01637.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC01646.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC03576.jpg

[DsmFighter]

Very cool.

[Junior2561]

:cool: should be a sweet ride Mikey :rock:

[mogs01gt]

:rofl:
BAH damn kid :p I didnt pay any attention to the last picture.:beef:

Do I see someone wearing rubber gloves????:gay::rofl:

[Handyman]

Nice job Mike...I told you I knew you were working in the garage this winter..:rock:

[E Green SVT]

:cool: should be a sweet ride Mikey :rock:

Belt driven power adders FTL :disturbed:


BAH damn kid :p I didnt pay any attention to the last picture.:beef:

Do I see someone wearing rubber gloves????:gay::rofl:

LOL, yea that picture was pretty much the only picture you needed to look at!!


Nice job Mike...I told you I knew you were working in the garage this winter..:rock:

Yes, but you didnt know what I was doing!:tongueout:


Really guys, I'm just swapping intakes, thats all, its a stock intake... :rock:

[mustang8d3]

Just wondering what parts are needed to do the swap with the 2003 blower? I have a 2001 cobra that i was thinking of doing the same thing to. Thanks Tony

[E Green SVT]

Just wondering what parts are needed to do the swap with the 2003 blower? I have a 2001 cobra that i was thinking of doing the same thing to. Thanks Tony

A ton of parts.

1) all intercooler lines and elbows
2) intercooler fluid resevoir
3) heat exchanger and mounting brackets
4) intercooler
5) intercooler pump and mounting bracket
6) intercooler cap(mounts to front of lower intake and has 1 in and 1 out intercooler line)
7) intercooler pump wire pigtail
8) timing cover
9) every single pulley except AC and water pump
10) supercharger pulley bridge that a few idlers mount to
11) both belts
12) lower intake
13) IAC valve(that thing that sits on top of the plenum/elbow)
14) supercharger and plenum
15) alternator and both mounting brackets
16) alternator wire pigtail
17) throttle and cruise cables
18) throttle/cruise cable bracket that mounts on the blower
19) the whole vacuum assembly and the stuff it all plugs into on the driver side of the blower
20) main feed line comming out of PS resevoir(the bigger one going to the pump)
21) return PS line(the other smaller one out of the resevoir) as well as the sections that "T" to right next to the radiator and to the booster
22) pcv valve and hose
23) EGR valve
24) EGR tube
25) oil cooler
26) all of the soft radiator hoses:
a) upper hose going from the crossover tube to the radiator
b) the big long one going from the middle of the crossover directly down and goes into the thermostat
c) lower hose going from lower radiator to t-stat(about 10" long)
d) hose going from oil cooler to t-stat(about 10" long also)
e) smaller diameter hose going from bottom of coolant resevoir to t-stat
----> the last hose (e) may not be needed to swap, but i did anyway
27) coolant crossover tube(hard U-shaped tube going from head to head)
28) fuel rails(i'm not sure if the pressure sensor on the driver side rail is the same, but we swapped that too)
29) boost bypass valve
30) gaskets:
a) intercooler cap(mounts on front of lower intake)
b) plenum to blower(if you get a supercharger with the plenum on already, then you don't need this)
c) throttle body to plenum
d) IAC valve to plenum
e) EGR valve to back of blower
f) timing cover(3 parts to this gasket, and they are all sold separately)
g) supercharger to lower intake(this one can be reused if you can het the original from the guy with the 03)
h) you can also use your original lower intake to head gaskets. you just have to cut off two small tabs(one on each one). you'll see when you try to line them up with the 03/04 lower intake. no big deal at all, takes 3 seconds.

[LS1Fury]

Congrats. should run decent

[Buckman]

Lookin' good!

[99Slobra]

****s weak....It'll never get finished..even with all the parts.....lol

[E Green SVT]

****s weak....It'll never get finished..even with all the parts.....lol

Bah, if I have to I will push it down the 1320. :rofl:

Here is a somewhat complete modlist.

Obviously the whole Eaton assembly, including a ported eaton, ported throttle body, and a ported plenum. Here are some of the extras that arent stock or coming off an 03/04 Cobra.

- LFP intercooler reservoir
- LFP Heat exchanger
- SCT BA 2400 Maf
- JLT Intake
- Canton Radiator Reservoir
- 03/04 Cobra fuel tank with dual Ford GT pumps

[SableGTO]

****s weak....It'll never get finished..even with all the parts.....lol
It's not an Akron Horsepower project, it should be able to get finished in less then 2 years.

:spank2:

:rock:
:wave:

[E Green SVT]

Starting to come together piece by piece...

http://i33.photobucket.com/albums/d65/mikec917/Eaton.jpg

[SeaHorse]

Looking good Mike, keep us updated.

[thetraitor]

Pretty cool, can't wait to see the end results.

[stangman]

very nice.
did that guy send you all the parts yet?

[One Sweet Day]

looks good mikey!:thumb_beer_cheers:

[USMCStang]

Jesus! Can't ANYBODY stay N/A anymore?:bs:

Good luck Mikey...it was only about a year and a half ago that you were learning how to install an X-pipe for the first time. You've got your work cut out for you:thumb_beer_cheers:

[E Green SVT]

Jesus! Can't ANYBODY stay N/A anymore?:bs:

Good luck Mikey...it was only about a year and a half ago that you were learning how to install an X-pipe for the first time. You've got your work cut out for you:thumb_beer_cheers:
Join the club Mike, everyone is doing it!! :tongueout:

And yes, I remember that day over at Cara's, in the past 2 years I have learned more about cars and working on them than I ever thought I would, I also have kyle and stew to thank as well, they have helped me out a lot with this project. :rock:

Paul - Yep, I received the remaining parts, but I still may be missing a thing or two.

[99Slobra]

sssssslllllloooooooowwwwwww....lol

Amazed to see it together...ish...

[E Green SVT]

sssssslllllloooooooowwwwwww....lol

Amazed to see it together...ish...

That is a very big ish...lol. Still got a bit of work ahead of us, but shouldnt be too bad.

[all5.0]

congrats!!!! you should put 03-04 bumpers/spoiler on it too. you'll have the only e-green termmie.

any deal on the original intake?

[E Green SVT]

congrats!!!! you should put 03-04 bumpers/spoiler on it too. you'll have the only e-green termmie.

any deal on the original intake?

Haha, I would very much like to do Terminator bumpers/spoiler and mirrors and hood, but the money tree has lost most of its leaves for now, but who knows, maybe next year!

:skid:

My stock intake was traded/sold when I got all the 03 parts, sorry.

I am hoping after my dad feels my car he will slap a KB on his! :rock:

[SeaHorse]

Well it might be slow but it sho does move purty good

http://www.kellyskindergarten.com/Monthly%20Centers/images/leprechaun_dancing_jig%5B1%5D.gif

[E Green SVT]

:gay:

[E Green SVT]

Might think about having a small mod party here once I get the remainder of the parts and when Pauls car is finished...Not a TON of stuff left to do, but I just wanna get the car finished and tuned!

[thetraitor]

Don't rush it, I found out the hard way. If you want to have a mod party, I ought to be able to come if it's on a sunday. :rock:

[E Green SVT]

Well, I think I have every part to just about finish up the car... I work all friday and saturday this week, but if anyone would be interested, I am probably going to try and work on it this Sunday, so if someone wants to come over and lend a hand, you are more than welcome. :rock:

[stangman]

Well, I think I have every part to just about finish up the car... I work all friday and saturday this week, but if anyone would be interested, I am probably going to try and work on it this Sunday, so if someone wants to come over and lend a hand, you are more than welcome. :rock:

if I didn't have work at 12 30 id be there.

[tedBalog]

But that's Mothers day. :disturbed:

[Mustang02]

Well, I think I have every part to just about finish up the car... I work all friday and saturday this week, but if anyone would be interested, I am probably going to try and work on it this Sunday, so if someone wants to come over and lend a hand, you are more than welcome. :rock:
Mother's day and I have to report into the office at 8am.... Good luck.

[thetraitor]

I *should* be able to help. Assuming I'm not getting bossed around by the mother.

[DsmFighter]

I *should* be able to help. Assuming I'm not getting bossed around by the mother.

You= Momma's *****

The trick it to make yourself busy 12 hours a day. Sitting in front of the computer for a couple hours a day makes you her target!

[E Green SVT]

Damn...forgot about that. :beef: Oh well, I'll still be working on it. :rock:

[thetraitor]

You= Momma's *****

The trick it to make yourself busy 12 hours a day. Sitting in front of the computer for a couple hours a day makes you her target!

Sunday = Jake's day off. He helps mom.

Looks like I'm good to help, Mikey. :lol:

[E Green SVT]

http://i33.photobucket.com/albums/d65/mikec917/DSC01628.jpg
http://i33.photobucket.com/albums/d65/mikec917/DSC01632.jpg
http://i33.photobucket.com/albums/d65/mikec917/DSC01634.jpg
http://i33.photobucket.com/albums/d65/mikec917/DSC01633.jpg

My car sucks. :crying:

[stangman]

very nice. I'll let you know my work schedule here in the next few days.

[Junior2561]

no, you suck, drink a Monster and get back out there :rock:

Its coming though Mikey ;) everything is a process.

[DsmFighter]

Looks good man. Keep chugging along with it.



no, you suck, drink a Monster and get back out there :rock:

Its coming though Mikey ;) everything is a process.

Ain't that the truth! My car runs but for some reason hooking up the boost gauge has been horrible!

[BlkBullitt]

Mikey you're still not done yet? Have you gotten all the parts in yet or are you still being held up on parts?

On another note the engine bay is nice and clean.

[stangman]

Mikey you're still not done yet? Have you gotten all the parts in yet or are you still being held up on parts?

On another note the engine bay is nice and clean.

I know one part he's waiting on is the coolant resivior tank he let me barrow.

[SableGTO]

Still not done yet aye?
Stop whacking in the shed and get the car done boy!

[BlkBullitt]

Still not done yet aye?
Stop whacking in the shed and get the car done boy!

No joke. Vader may very well be cruising the streets regularly before this is done. :spank2:

[kurt02gt]

knowing Mikey it is done and he is trolling the streets beating up on Civic's

[BlkBullitt]

knowing Mikey it is done and he is trolling the streets beating up on Civic's

This could be true.

[E Green SVT]

Not civics Kurt, cavaliers. Actually I have most parts, but the thing with this swap is there is so much stuff to change and its not just as simple as things fitting into place and working. I have run into a lot of problems with parts not fitting and such and not having all of them. For instance right now I am waiting on a power steering pulley to get here. After that I should be able to bolt the rest of it up and crank it by the end of the week if I can get a few people to come over and help (drew and stew have already offered). So with any luck it may run by the end of this week or next.

[stangman]

I volunteered too. come on now. :spank2:

[E Green SVT]

I volunteered too. come on now. :spank2:

Ooops, forgot about that! :mad: If we can get 3 or 4 people here helping, it could be done in no time. However I am kinda worried about taking off the power steering pulley, anyone ever attempt that? I've heard of some people busting up the pump on removal! :scared:

[BlkBullitt]

Ooops, forgot about that! :mad: If we can get 3 or 4 people here helping, it could be done in no time. However I am kinda worried about taking off the power steering pulley, anyone ever attempt that? I've heard of some people busting up the pump on removal! :scared:

Don't be scared Mikey :spank2:

[Enfynet]

Who needs power steering? ;)

[BlkBullitt]

Who needs power steering? ;)

That's right, time to buy a Flaming River Manual Rack. Drop some weight and gain some power Mikey!

[Junior2561]

Ooops, forgot about that! :mad: If we can get 3 or 4 people here helping, it could be done in no time. However I am kinda worried about taking off the power steering pulley, anyone ever attempt that? I've heard of some people busting up the pump on removal! :scared:
been there, done that, just get the PS puller from autozone. :spank2:

[E Green SVT]

been there, done that, just get the PS puller from autozone. :spank2:

I got the one from Advance Auto. :box:

[Rabnud]

Wait... youre STILL not done?! DAMN! hahahah, just kidding bro!

[GTkyle]

Wait... youre STILL not done?! DAMN! hahahah, just kidding bro!
No you're not ;) :tongueout:

[KBOYZ95]

:spank2:

[E Green SVT]

Wait... youre STILL not done?! DAMN! hahahah, just kidding bro!

Nope, its not easy trying to make 400+ rwhp when your 17! :lol:

[GTkyle]

Nope, its not easy trying to make 400+ rwhp when your 17! :lol:
Age has nothing to do with slacking. Well unless you were 80 ;) :lol::tongueout:

[E Green SVT]

http://i33.photobucket.com/albums/d65/mikec917/DSC01642.jpg

I totally pwn'd the power steering pulley. Off in a matter of 5 minutes top's. That was easy. :rofl:

[GTkyle]

Nice, now get the new one on and slap it all back together and fire it up!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1

[E Green SVT]

Thats the plan. Unfortunately I didn't know that there was a seperate install tool. :noidea: So I'm getting that tomorrow, putting that on, then going from there.

[99Slobra]

lol. Wow mikey.....

[E Green SVT]

lol. Wow mikey.....

:breath:

http://i33.photobucket.com/albums/d65/mikec917/DSC01643.jpg
http://i33.photobucket.com/albums/d65/mikec917/DSC01644.jpg
http://i33.photobucket.com/albums/d65/mikec917/DSC01648.jpg

[GTkyle]

Nice, get that puppy finished!

[E Green SVT]

Alright well i'm still waiting on my pulley install tool, but other than that, I think I have just about everything to finish the car up. If anyone is interested in helping some, I have this saturday off and I should have the pulley installer by then and maybe with an ounce of luck, we could fire it up. :rock:

[stangman]

:drool::drool::drool: :skid:

[Rabnud]

Alright well i'm still waiting on my pulley install tool, but other than that, I think I have just about everything to finish the car up. If anyone is interested in helping some, I have this saturday off and I should have the pulley installer by then and maybe with an ounce of luck, we could fire it up. :rock:
*sigh* Shoulda let me know... I'm pretty sure I have an extra billetflow one (the GOOD ONE that you'd want to use anyhow) I coulda sold you for cheap. tisk, tisk!

[E Green SVT]

*sigh* Shoulda let me know... I'm pretty sure I have an extra billetflow one (the GOOD ONE that you'd want to use anyhow) I coulda sold you for cheap. tisk, tisk!

Heh...I did better. Some guy in California is shipping it to me for free. He also gave me an 03 Cobra power steering pulley for free. :bow: However I would have thought it would have been here by now, so I may have to take you up on that if it doesn't arrive.

[Rabnud]

You do realize that if any part of your project is rednecked in any way.. I'll drive up there to kick your ass... right? hahaha!

Make sure you post up some good pics/video of it when you got it running! And, for the love of god... get it tuned man!! VERY important!

[GTkyle]

You do realize that if any part of your project is rednecked in any way.. I'll drive up there to kick your ass... right?
Mikey it looks like your in for it....i worked on the car :tongueout:

[E Green SVT]

You do realize that if any part of your project is rednecked in any way.. I'll drive up there to kick your ass... right? hahaha!

Make sure you post up some good pics/video of it when you got it running! And, for the love of god... get it tuned man!! VERY important!

Do you really think I wouldn't get it tuned?! Geez, I'm 17, but I'm not THAT stupid. :lol: :rofl: And hey, I'm putting a Heaton on it, its already rednecked. And like Kyle already said, he's worked on it. :lol:

Dont expect too much. :tongueout:

[stanger]

little does he know it but when he's done with his he's gonna shoehorn a hemi in my strangler... heh heh heh

[BlkBullitt]

Looking forward to seeing it in action Mikey :thumb_beer_cheers:

[E Green SVT]

Alright, just ordered an Xcal 3 with a base tune to drive it to get tuned on it, and I'm going to be scheduling a tuning appointment soon, so I really gotta get crackin! Anyone and everyone is welcome to come help me out on it. :)

[BetterDays]

Heh...I did better. Some guy in California is shipping it to me for free. He also gave me an 03 Cobra power steering pulley for free. :bow: However I would have thought it would have been here by now, so I may have to take you up on that if it doesn't arrive.

He made you Dragon (http://www.youtube.com/watch?v=3ISn1Hc2V_Y), didn't he? :wtf:

[Rabnud]

Mikey it looks like your in for it....i worked on the car :tongueout:
Oh snap! hahahaha




Do you really think I wouldn't get it tuned?! Geez, I'm 17, but I'm not THAT stupid. :lol: :rofl: And hey, I'm putting a Heaton on it, its already rednecked. And like Kyle already said, he's worked on it. :lol:

Dont expect too much. :tongueout:
Well, you did put, like what... 7.35 gears in the rear right? Did you swap those back out too? Did you stay on the stock heat exchanger? If so, I'd say, invest in some cooling mods when you can!!! I'm really curious to see the numbers!

[GTkyle]

He's got an aftermarket h/e, and he went with the 8.43 rear gears.
:tongueout:

[E Green SVT]

Oh snap! hahahaha




Well, you did put, like what... 7.35 gears in the rear right? Did you swap those back out too? Did you stay on the stock heat exchanger? If so, I'd say, invest in some cooling mods when you can!!! I'm really curious to see the numbers!

Haha, 4.56's in there right now, gonna stay that way for a month or so, I wanna see what it's like at the track before i throw some 3.73's in.

Also, it should be fairly efficient I'm thinking. I have an LFP heat exchanger and also the blower is ported, and I'm only running 8 lbs, so the IAT2 temps shouldn't be very high at all, I've heard the port brings them down a bit also.

[E Green SVT]

Alright, I have somewhat of an emergency. I am planning on getting the car tuned by Don LaSota and I need this car done ASAP because the only date in the next 2 weeks he can get me in is going to be this Saturday, so if anyone, anyone at all could come over and maybe lend me a hand with tying up this project or something I would greatly appreciate it and happily provide food/drinks and pay for gas money, let you go on a date with my sister etc WHATEVER. I want to do everything in my power to be able to get this thing done this week.

Just about every 03 Cobra part that needs installed is on, save for the blower pulley, I'd just like some help to make sure I dont f any of this up now. :werd:

[BetterDays]

Alright, I have somewhat of an emergency. I am planning on getting the car tuned by Don LaSota and I need this car done ASAP because the only date in the next 2 weeks he can get me in is going to be this Saturday, so if anyone, anyone at all could come over and maybe lend me a hand with tying up this project or something I would greatly appreciate it and happily provide food/drinks and pay for gas money, let you go on a date with my sister etc WHATEVER. I want to do everything in my power to be able to get this thing done this week.

Just about every 03 Cobra part that needs installed is on, save for the blower pulley, I'd just like some help to make sure I dont f any of this up now. :werd:

Pics of said sister, thanks!

[L8Apexer]

What he said (unless she is younger than you).

[GTkyle]

She is legal. That should get you some help Mikey.

[E Green SVT]

She is legal. That should get you some help Mikey.

Heh, I hope, I just want the damn thing to start up before this saturday and I will be happy. :cheer:

[BetterDays]

She is legal. That should get you some help Mikey.

Pics then?

Just trying to help you out, Mikey....

Some guys on here may help you just to be able to look at her in person.... (like Kyle) :wtf:

[SableGTO]

I'm in for a date with the sister. Let me know when your wrenching.

[BetterDays]

I'm in for a date with the sister. Let me know when your wrenching.

Nice.

Does Erika get to teach Mikey a lesson or 3?

:scared::wtf:

[E Green SVT]

I'm in for a date with the sister. Let me know when your wrenching.

Is this a trade offering, like Erika for my sister for the night, or what?


Nice.

Does Erika get to teach Mikey a lesson or 3?

:scared::wtf:

:wtf:

Also, Zach said he could come over and lend a hand this wednesday, so it will most likely be wednesday as that is my only day off this week and i usually work 5-10pm the rest of the week.

[thetraitor]

Yeah, I offered first so I get dibs on the sister. Back off Jason!

[E Green SVT]

Huge thanks to Zach and Drew tonight, they helped me out BIG TIME, the car is almost ready to fire. I owe you guys a ride in the green machine after its tuned on saturday, you really helped me square some things away and clean it up a little bit!

[SeaHorse]

Huge thanks to Zach and Drew tonight, they helped me out BIG TIME, the car is almost ready to fire. I owe you guys a ride in the green machine after its tuned on saturday, you really helped me square some things away and clean it up a little bit!


Very nice - congrats Mike!


Good job Drew and Zach for lending a hand

[E Green SVT]

Very nice - congrats Mike!


Good job Drew and Zach for lending a hand

I know the real reason they came over to help me...and it wasn't to come over and help me. :spank2:

:rofl:

[SeaHorse]

I know the real reason they came over to help me...and it wasn't to come over and help me. :spank2:

:rofl:

Really now? I'm still waiting to see this hot lil flower of a sister you have :drama:


Maybe i'll bring over some SOAD albums for you and some salt water taffy to entice the lil honeypot with :tongueout::rofl:

[E Green SVT]

:rofl:

[Rabnud]

*Ahem* lol

[SableGTO]

I didn't make it out. Erika said no. Sorry buddy.

[tedBalog]

I didn't make it out. Erika said no. Sorry buddy.

I see who's the woman in the marriage.

[E Green SVT]

*Ahem* lol

Ohhh Sorry!! Thanks to Rabnud for coming through in the clutch, he is the pulley installer tool god. :thumb_beer_cheers:


I didn't make it out. Erika said no. Sorry buddy.

No worries, me and kyle are going to try and finish up my pile of crap this friday. :rock:

[Sable]

I didn't make it out. Erika said no. Sorry buddy.

Don't you even lie to him, I told you to take his sister out and give her a slap on the ass for me. :rofl:

He couldn't make it out because he's been working crazy hours lately.

[E Green SVT]

Don't you even lie to him, I told you to take his sister out and give her a slap on the ass for me. :rofl:

He couldn't make it out because he's been working crazy hours lately.

:shock:

LOL, its understandable.

[SableGTO]

LOL!!!
If you guys are still working Friday evening I will come help.
PM me your cell again mikey, I lost it when my phone died.

[E Green SVT]

LOL!!!
If you guys are still working Friday evening I will come help.
PM me your cell again mikey, I lost it when my phone died.

I think kyle will be coming up friday to finish it up and you are more than welcome to stop by, I get off work at 6, but there really isn't much left to be honest, however we will probably be starting it up :)

PM sent

[thetraitor]

Your stupid vacuum lines took longer than anything! Just make sure to get that last clamp, and try to get a couple wrenches on the EGR fitting and see if you can get it off.

Looked good Mikey, can't wait to see it run. :thumb_beer_cheers:

[TheHolyCobra]

Your stupid vacuum lines took longer than anything! Just make sure to get that last clamp, and try to get a couple wrenches on the EGR fitting and see if you can get it off.

Looked good Mikey, can't wait to see it run. :thumb_beer_cheers:

Yeah, the vacumn lines on these cars takes a LONG time to get sorted out. Took me a long time researching and many PMs to other Terminator owners to make sure I had it right.

Give me a call when you do the lines Mikey, I will walk you through it. :thumb_beer_cheers:

[H8R]

lookin sweet

[E Green SVT]

Well, we hit a couple road blocks tonight and the car cant be tuned tomorrow, but thanks to Jason and Kyle for coming over tonight... Kinda mad it couldn't be finished, but what can ya do... just a part of working on cars I suppose.

[GTkyle]

Oh well, in due time. You'll be able to hit the track by the end of the month for sure.

[SeaHorse]

Hang in there man, you're making good progress. Hell, look at all the set backs i've had with this crap car of mine. Just have to continue to work thru them or take a week or so to get your mind right.

[thetraitor]

Hang in there man, you're making good progress. Hell, look at all the set backs i've had with this crap car of mine. Just have to continue to work thru them or take a week or so to get your mind right.

+1

My car has had the blower on it for 3 months now, and I haven't driven it but once and the distributor went out. Got the distributor fixed, and the car runs really rich and leaked oil like no other. Always something stupid. You have plenty of time, it'll get done and you'll enjoy it soon enough.

[E Green SVT]

Well, ordered the fitting from Ford and it will be here Monday and also got those two bolts to bolt down the iat2 sensor. Also ordered the two belts from Autozone, one of them 1" bigger and the other 2" bigger, so hopefully one of those will fit, so by tuesday the car could be complete assuming those belts work...I think 2" should give me enough slack to get that on there though.

[stangman]

so what went wrong? Was the only thing your belt being too small?

[E Green SVT]

so what went wrong? Was the only thing your belt being too small?

That and my egr fitting threads were all stripped.

[stangman]

That and my egr fitting threads were all stripped.

so did you reschedule your tune? If so, when is it?

[Rabnud]

That and my egr fitting threads were all stripped.

I say order the delete kit and block that shiat off!!

Sorry to hear that happened bro!

[E Green SVT]

I say order the delete kit and block that shiat off!!

Sorry to hear that happened bro!

Haha, yeah, I planned on deleting it in the first place, but to delete it I had to get that fitting and the tube off. :)

As far as a rescheduled tune...I'm not sure at this point.

[SableGTO]

I felt bad we couldn't finish it. Sorry man. You are so close!
It will feel great when you get it done.

[E Green SVT]

I felt bad we couldn't finish it. Sorry man. You are so close!
It will feel great when you get it done.

No worries man... Because I have the ULTIMATE update for you all.

THE GREEN MACHINE LIVES!!!!!!

Me and Stew wrenched on it for a little bit tonight getting some things done and we tried starting it up and she purred like a kitten! Well, it was pretty rough actually seeing as how I didn't have the EGR plugged :rofl: So it sounded like a huge cam, but it started right up!

I would like to thank Stew tonight for coming over and helping me get it where it is tonight, he also completely did the wiring for my gauges, he's a wiring GOD!! They look AWESOME and match my stock gauges almost perfectly!! You guys have NO idea how happy I was to hear it start up, the pinnacle point of my year right there! Awesome, F'n Awesome...!

Now, time for some pic's bishes!!

http://i33.photobucket.com/albums/d65/mikec917/DSC05191.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05193.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05194.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05196.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05200.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05202.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05206.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05207.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05218.jpg

http://i33.photobucket.com/albums/d65/mikec917/DSC05219.jpg

:guitar:

[TheHolyCobra]

I'm glad that I could help Mikey, and I am realy glad to see that the car is finally done (well, atleast 99.99999999%). Now just get the thing tuned so you can ACTUALLY drive it. :rock:

[Sable]

I'm so happy for you! That thing will be nasty this racing season. :cheer:

[SableGTO]

Congrats man!
Awesome job getting it done.
I am really going to be the slow guy on the block with everyone finally getting their cars done. It's ok, I'll look good and you guys can be fast. Somebody has to look good right?

[SeaHorse]

Congrats Mike


Nice work to everyone that chipped in and helped him get this thing going - hats off to you.

[GTkyle]

I told you it'd run, nothing was changed internally :p Congrats though, cant wait till you get that thing tuned and can make it go WEEEE.

[E Green SVT]

Thanks guys!

Here's a startup video for you all

(Note, the first time we started it it ran for a couple seconds then died, we guessed because the supercharger wasn't moving any air around or anything, so we thought we'd try and do that manually) :noidea:

http://s33.photobucket.com/albums/d65/mikec917/?action=view&current=MikeyEaton2ndStartup.flv

[SeaHorse]

Thanks guys!

Here's a startup video for you all

(Note, the first time we started it it ran for a couple seconds then died, we guessed because the supercharger wasn't moving any air around or anything, so we thought we'd try and do that manually) :noidea:

http://s33.photobucket.com/albums/d65/mikec917/?action=view&current=MikeyEaton2ndStartup.flv


:rofl: - How much boost was Stew able to make? I think you'll need a little more.

[stangman]

very nice!

[E Green SVT]

:rofl: - How much boost was Stew able to make? I think you'll need a little more.

Heh, his spinning technique was weak, I was still only seeing vacuum, I wanted to hear it whine!!!! :rofl:

[thetraitor]

Heh, his spinning technique was weak, I was still only seeing vacuum, I wanted to hear it whine!!!! :rofl:

Should've rigged a socket to a cordless drill and let er rip! :rofl:

Grats Mikey, good to see it running! Now mine on the other hand...

[BetterDays]

Still waiting for pics of your sister, LOLLERGIRL.

:lol:

[White99GT]

Looks good man.

[GTkyle]

:rofl: - How much boost was Stew able to make? I think you'll need a little more.
Don't question his boosting abilities, he'll pwn your car

http://img.photobucket.com/albums/v301/rcmann/stewinmytrunkstealinspace.jpg

[E Green SVT]

:lol:

[TheHolyCobra]

Mikey and I just got back from getting his car tuned, and if I had to describe tonight then I would say this:

http://www.svtperformance.com/forums/images/smilies/eek5.gif

http://newboards.tusclan.com/images/smilies/jawdrop.gif

[SeaHorse]

What does it run?

:spank2:

Congrats!

[stangman]

numbers?

[E Green SVT]

:scared:

The car is almost scary to drive!! Thing freakin HAULS!! Especially with 4.56's!!!

As far as numbers, she put down 430 rwhp. :rock: Sure I could've made more putting in lower (numerically) gears like some 3.27's and packing the intercooler reservoir with ice and ran it on a dyno on a day that was about 60* outside instead of the 80's today and giving it a little more timing, but to me numbers dont mean anything, a dyno is merely a tuning tool. Cant wait to get this puppy on the track!

I figured the car would be too much to handle with 4.56's...but wow...throw it into second gear and the thing feels like a damn rocket!

HUGE props to Don and Rob LaSota @ LRT!! Thing drives BETTER than it did when stock!! :rock:

[stangman]

:bow:I'm waiting for my ride.

[E Green SVT]

:bow:I'm waiting for my ride.

Bring an extra pair of underwear.

[stangman]

Bring an extra pair of underwear.

I don't know man. I may have to bring a whole suitcase of underwear with me.

[SeaHorse]

Bring it to the track Friday.

[E Green SVT]

Bring it to the track Friday.

Friday nights @ 42 = lame...never going to one again. Tuesday FTW.

[TheHolyCobra]

I don't know man. I may have to bring a whole suitcase of underwear with me.

You better bring a pair for every run he makes.

Let's just put it this way...I can compare the pull of his car to the pull of a 650 RWHP Kenne Bell 03 Cobra that I rode in a few years ago.

All in all, Mikey's car with the 4.56s is a MONSTER.

[Junior2561]

:rock: i want to see some times

[SableGTO]

Sounds amazing! Congrats Mikey!

Hey HolyCobra, How do you plan to keep up with Mikey now?
Personally, I give up.

[thetraitor]

Sounds amazing! Congrats Mikey!

Hey HolyCobra, How do you plan to keep up with Mikey now?
Personally, I give up.

Low 11s for Mikey. Don't you have the bottle? ;)

[Sable]

No time or money yet for the nitrous install, he may not have the bottle on until next year at the rate things are going for us.

[BlkBullitt]

Congrats Mikey! Glad to see everything worked out with it. Now... don't break a half shaft at the track :thumb_beer_cheers:

[thetraitor]

No time or money yet for the nitrous install, he may not have the bottle on until next year at the rate things are going for us.

I feel the pain... the blower has been on my car since spring break and I have just started to drive the car around... on a base tune.

[SableGTO]

Yeah, what she said.
I have to get a few things to beef up the fuel system before I can even consider putting on the nitrous.

[DsmFighter]

Congrats mike! Glad to see you like being boosted! I'll have to have you take me for a ride... I know how my car feels with 4.10's and a T-45. I'm interested to see what a 4v with a eaton and 4.56's feel like off the line!

[DsmFighter]

Oh I almost forgot. What kind of tq, and where at in the powerband?

[E Green SVT]

Thanks guys! I love this car now and all the blood sweat and tears and time put into it are well worth it!! :D


Oh I almost forgot. What kind of tq, and where at in the powerband?

Torque is right around 390 and it peaks there around 3500 or so and never really falls off :thumb_beer_cheers:

[SableGTO]

I still make more torque then you Mikey!!!
Now if I could just lose some weight....

[SeaHorse]

Friday nights @ 42 = lame...never going to one again. Tuesday FTW.


Yeah I agree. Saturday or Tuesday.


Although the stupid obnoxious RX7 was out there again last night - I need to call ahead to find out when that thing is NOT there.

Why is that guy allowed to sit in the pits and rev that thing to 15,000 rpms all night long???

Talk about pushing customers out the door at 42 - that will do it quick. I'm not spending good money to go to the track with my wife if we're getting a friggin headache because of those *******s.

D42 - grow some balls and tell them to knock that **** off.

[tedBalog]

Yeah I agree. Saturday or Tuesday.


Although the stupid obnoxious RX7 was out there again last night - I need to call ahead to find out when that thing is NOT there.

Why is that guy allowed to sit in the pits and rev that thing to 15,000 rpms all night long???

Talk about pushing customers out the door at 42 - that will do it quick. I'm not spending good money to go to the track with my wife if we're getting a friggin headache because of those *******s.

D42 - grow some balls and tell them to knock that **** off.

Yeaaa... Annoying, he sat behind me revving it like no other the night I was there.

[DsmFighter]

Although the stupid obnoxious RX7 was out there again last night - I need to call ahead to find out when that thing is NOT there.

Why is that guy allowed to sit in the pits and rev that thing to 15,000 rpms all night long???

Talk about pushing customers out the door at 42 - that will do it quick. I'm not spending good money to go to the track with my wife if we're getting a friggin headache because of those *******s.

D42 - grow some balls and tell them to knock that **** off.


AGREED! That stuff gets annoying...

[SeaHorse]

Guys don't make suggestions, it won't turn out well. Just live with the ear piercing low 12 second 15,000rpm ear drum busting noise.

[DsmFighter]

Guys don't make suggestions, it won't turn out well. Just live with the ear piercing low 12 second 15,000rpm ear drum busting noise.

Where's the suggestion box there? I'd love to leave them one!

[SeaHorse]

PM TripleNickel he'll be glad to address our ''whining''.

[TheHolyCobra]

Hey HolyCobra, How do you plan to keep up with Mikey now?
Personally, I give up.

Honestly I don't know...I guess I'll have to wait and see what kinda times he runs, then based off trap speed/ET go out and try to find something for cheap.

For all I know a pullied/ported Eaton might not keep up with him...:(

[GT Tangerine]

Congrats, sounds awesome.:rock:

[thetraitor]

Sounds amazing! Congrats Mikey!

Hey HolyCobra, How do you plan to keep up with Mikey now?

Where do you think Mikey got the Eaton? ;)

haha j/k

So when am I getting a ride in the Incredible Hulk, Mikey?